EE
Cooky EE pack, published as v1 hardware paper. Cards checked in verbatim under docs/ee-src/; the shaft map and catcher follow docs/rig-src/FOIL_RIG.md (2026-08-28 Ø12 recut) — the ee-src FOIL_RIG card is the superseded one-piece record. Compiled, not a PO.
Shaft map
| Feature | Z (mm) | Note |
|---|---|---|
| shaft | Ø12 through, J1 → Z=97 |
no land bigger than 12.00 between the backface and the 7001 CE/HCP4A |
J1 foil |
0–14 | — |
J2 foil can |
ends Z=71.00 | 1 mm air to the clamp |
T1_CATCHER_CLAMP |
72–76 | two-piece 17-4/steel clamp, fitted after the shaft is through the cans — not a one-piece Ø22 on a stepped journal, not 25 MPa |
6001 |
78–86 | 0.15 rattle |
7001 CE/HCP4A |
88–97, pocket Ø28 | SKF hybrid ACBB 12×28×8, grease attainable 98k, preload 17–40 N. Not the old 51101 Ø26.20. Still not 25 MPa. |
eddy probe (J2) |
Z=66 | still sees Ø12 |
Foil IDs stay 12.03 (Ø12 + 2×0.015). The cans do not grow.
6001 (78–86) and 7001 CE/HCP4A (88–97, pocket Ø28) slide from the cold end; snap/collar locate. Quote pack stays Z=72 / 0.55; the gallery STEP stays. 51101 at 20k is history — not a spin plan.
No AMB on this CAD. Sleeved AMB is step 5, PARKED (see below).
Instrumentation
Type N Ø1.5: TC-ID A/B, TC-RIM, TC-GAS. Cold 20k does not wait on instrumentation. 0.20 still not trip-safe. Pipeline step 3 stays OPEN — the rig is not instrumented.
Trip card
| Path | Law |
|---|---|
| Soft trip | ID ≥400 C |
| Hard dump | 200–300 C ID is a rub |
Paper logic. Nothing is wired; step 3 is OPEN and step 2 has not run.
Buy list — compiled, not a PO
| Item | Qty / form |
|---|---|
Omega BLMI-XL-N-116U-6 |
×5 |
SKF 7001 CE/HCP4A |
hybrid ACBB 12×28×8 — compiled, not a PO |
SKF 6001/HC5C3 |
— |
Bently 3300 XL 4 mm |
pair |
| Foils | RFQ |
Compiled only. Do not buy. No PO exists.
AMB parking
Sleeved AMB ≳5e7 is step 5, PARKED until a 20k dwell exists. No AMB on this CAD.